7 Steps Involved In Cleaning Your Car From Outside

car wash

With the changes in the season, it is important to wash your vehicle to remove all the dust particles. Also, remove other elements that are caught via the road. It is important to keep car panels clean or get replaced by car panel manufacturers. Not cleaning your car properly will create marks and scratches on your car.

Tips for Washing Wheels:

  • Clean the wheels one at a time. First, wash the wheel, then rinse it and let it dry, then move to the next wheel. Doing this prevents clean wheels from air-drying. Keep one towel for drying the wheels of the cars and the other for the body of the car.
  • Make use of the proper cleaners to perform this task. It is essential to use cleaners that are designed specifically for the type of wheels that you have. There are many cleaners in the market that work for wheels and remove brake dust and dirt. Use a strong cleaner if there are many impurities on the surface.
  • Get the right scrubbing brushes to clean your car’s wheels. Use brushes that have feathered hair. This will not scratch the surface. For the inner areas of the wheels, look for long slender brushes. Use a stiff brush as tires are made of rubber.
  • The last step includes polishing your wheels. Polishing the wheel helps to create a barrier against dust, dirt, and other elements.

Steps for Washing Your Car:

Here are the steps involved in the cleaning of the cars. If you face a hurdle doing this, you can get replaced your car panel from car panel suppliers.

Park the vehicle in the shade:

Washing in direct sunlight is not recommended. Heat speeds up the drying process, increasing the likelihood of water stains. This will also prevent the cleaning solution from drying on the car’s surface before you can rinse it off.

Rinse the car to remove dirt:

A pre-rinse is the initial stage in automobile washing to eliminate any dirt that may have accumulated on the vehicle’s surface. In the long term, this will save you time.

Use two buckets:

The reason for utilizing two buckets is so that you can rinse and clean your washing sponge before re-filling it with soap. Dish detergents and hand soap should not be used on automotive paint because they are not designed for it.

Start at the top and work your way down:

The dirtiest areas of the vehicle are usually found near the bottom. If you work from the bottom up, you’ll be transferring dirt and filth to your car’s surface. Instead of moving the sponge or mitt in circles, wash in straight lines.

Rinse and dry the car:

If working in hot weather, rinse often to avoid wet streaks. To dry the vehicle’s surface, use microfiber cloth. Also, don’t forget to wipe the jambs, trunk, and hood jambs.

Feel the surface, consider using a clay bar if needed:

A clay bar eliminates impurities from a car’s surface that is impossible to remove with regular cleaning. If the surface seems rough to the touch, consider extracting the embedded debris with a clay bar.

Polish your car:

Waxing the car not only makes it shiny but also preserves the paint. Wax acts as a barrier, preventing dirt from being rubbed straight into the paint.

Leave a Reply

Your email address will not be published. Required fields are marked *